TILKOBLINGSKLEMME FOR LED STRIPS (10MM, 4PIN – RGB) – 10pakk

Connect wires to the LED strip without having to solder.

SKU: 115028 Categories: , Tag:

Description

Connect wires to the LED strip without having to solder.

The connection clamp is adapted to 10mm RGB LED stripes. 

You can cut the LED strip and connect to the clamp without soldering the wires. You simply attach the end of the LED strip to the socket and click on the attachment. The cable is attached in the same way. You do not need to strip the cable before mounting. 

Connection instructions

1

Cut the LED strip at a marked point.

2

Remove the self-adhesive protection under the LED strip.

3

Insert the LED strip and press down the lid on the connecter clamp.

4

Complete the connection of the LED strip

5

Insert the cable and press down the lid on the connector clamp. You do not need to strip the cable.

6

Make sure that the lid on the connector clamp locks completely in the base.

7

Complete the connection of the LED strip

8

The correct connection should look like this.