Emergency Battery for SafeLight and M-Flex
As an accessorie you can add our LED Strip Light Emergency Power Supply to provide emergency lighting in the event of a power outage.
Description
EMERGENCY LIGHT BATTERY MODULE FOR SAFELIGHT AND M-FLEX
As an accessorie you can add our LED Strip Light Emergency Power Supply to provide emergency lighting in the event of a power outage.
In the event of a power failure, the emergency light module will switch to battery operation and the LED light will illuminate at 10% of the original brightness. The device is approved for use in both dry and damp environments, and with a fully charged battery, the device will provide 1 + 1 hour of emergency lighting. After 1 hour, the device switches off automatically.
If a new voltage drop occurs, the unit will be active for another 1 hour. The battery function must be tested regularly.
Easy installation
- The emergency light module can only be connected to our M-Flex, SafeLight or SafeLight ECO LED strips M-Flex, SafeLight or SafeLight ECO LED strips
- The battery can be attached to the substrate
- Let the battery charge for at least 12 hours before use
Charging the batery
- The battery in the emergency light module is charged automatically when it is connected to power.
- The LED strip does not need to be connected to charge the battery.
- If the module gets hot, interrupt charging and disconnect the LED strip. Allow the battery to cool before continuing.
Storage
- Avoid contact with corrosive substances and do not expose the battery to heat or fire.
- The battery should be charged before storing.
- Avoid storing an empty battery.
- Recommended storage temperature is 0 to 30 ° C
Transport
- Handle with care during loading and unloading as well as during transport.
- Do not transport the emergency lighting battery unprotected together with flammable and explosive goods or sharp metal objects.
Service
- When changing the battery, the power must always be off.
- The battery should be serviced within 6 months.
LED indikator
The emergency light battery module has a LED indicator that shows the status of the device. These are:
Red constant light: The device is charging.
Green constant light: The device is fully charged.
Flashing green (1Hz): Power disconnected - Emergency function is activated
Fast flashing green (3Hz): The device needs its monthly check
Fast flashing green (5Hz): The device needs its yearly check
Flashing red: System error. Service required.
If the emergency function is in operation and the green light stops illuminating, the battery is empty.
Warning
- Do not immerse the device in water.
- Do not store the device near a fire or owen.
- Do not attempt to modify the device.
- Do not place the unit in a pressure chamber or expose it to microwave rays.
- Do not use the device if it emits a strong odor, generates heat, becomes discolored, deformed or appears abnormal in any way. Disconnect power and LED strip immediately and discontinue use.
- Discharge the battery before recycling. Do not mix in lead-acid battery recycling, ask your recycling station if you are unsure.
- Keep the battery away from children and pets.
Additional information
| Weight | 2,2 kg |
|---|---|
| Dimensions | 29,8 × 9,3 × 5,3 cm |
SPECIFICATIONS
|
Voltage |
220-245V, 50/60Hz |
|
Effect |
50W |
|
IP class |
IP65 |
|
Max load |
1500W / 100m LED strip |
|
Battery |
Lithium |
|
Battery charge time |
60 +60 minuts |
|
Input |
AC 85-275V |
|
Output |
DC 120-260V |
|
Ambient temperature |
-10 to +50°C |
|
Dimensions |
298mm x 93mm x 53mm |
|
Weight |
2,2 kg |
|
Material |
Aluminum |
|
Certificates |
CE |
